Windows DatabaseebooksStatistical Information

LWE10357 : Howto configure an ip address on a windows 2008 server core-installation

Symptom:

You have a windows server 2008 core server and need to give it an ipv4 address instead of dhcp

Cause:

none

Solution:

To change the ip address of a server core you use the netsh command. This command has lots of parameters and has an interactive shell.

netsh interface ipv4 set address name="LAN-1" source=static address=192.168.1.1 mask=255.255.255.0 gateway=192.168.1.250

Please note that this command is very powerfull, for more information use netsh /?.


Disclaimer:

The information provided in this document is intended for your information only. Lubby makes no claims to the validity of this information. Use of this information is at own risk!
Copyright © 2004-2011 Lubby (V3.0.10 Aug 2011)
Sponsored by Keskon.
Statistical information by Google Analytics