Windows DatabaseebooksStatistical Information

LLE10096 : Howto configure the Option 66 and 67 in ISC dhcp server


You need to set these options for configuration PXE boot from an ISC DHCP Server


You need to start bartpe or windows pe from the server and need these options


Under Debian GNU Linux the ISC DHCP server can be configured with the /etc/dhcpd3/dhcpd.conf file. You need to add the following entries for activating the option 66 and 67.

#option 66

option tftp-server-name "w.x.y.z";

#option 67

option bootfile-name "test.cfg";

After changing the configuration file you need to restart the DHCP Server. This can be done with:

invoke-rc.d dhcp3-server restart

Please note that the logging can be viewed int the /var/log/daemon.log. The easiest way to do this is with a command line and the command:

tail -f /var/log/daemon.log

To stop watching the logfile you use Strg-C.


The information provided in this document is intended for your information only. Lubby makes no claims to the validity of this information. Use of this information is at own risk!
Copyright © 2004-2016 Lubby (V3.0.11 Jan 2016)
Sponsored by Keskon.
Datenschutzerklaerung - Privacy statement - Privacyverklaring